The aim of this agreement is to indicate the specifications of the materials which are used in doors produced in the bootstrap and to undertake to produce them as follows:
Solid materials door stile (internal frame) used for making doors.
The optimal humidity rate is %12 consisted of the coniferous tree which was dried privately.
After it was purified from the snags, it is combined with finger-jointed, destroyed the deformation, and increased the resistance.
The size of the stiles’ section is 28*42
There are air space grooves that have 6*3mm measures inside the stiles.
There will be a double stile on the sub of the door leaf.
The door leaf is made up of 6 mm MDF covered by HPL (High-Pressure Laminate)
The lock housing is drilled for a 40 mm oval lock. Hinge housing and lock striker are drilled if there is a special request.
There will be used honeycomb which has resin-based, 1,3 kg/cm2 resistance and comply with TSEK in the framework.
General principles as mentioned above are the same for producing glazed doors. While the carcass process there will be a solid stile on the housing of glass opening that will be drilled in the middle of the door leaf.
All the door frames are made from 42 mm sandwich panels (12mm MDF+18 mm solid wood + 12mm MDF)
All the door frames are suitable for using regulated architraves and the architraves montage grooves, gasket grooves and rabbet will be drilled.
The door surface will be cover with HPL.
The join of the door head will be 45 degrees. There will be a drill for a special screw.
There will be drilling for gasket groove in the frame rabbet in order that the sound and heat insulation is provided.
In accordance with details of adjustable moldings, they will be made up of MDF that has 12 mm thickness and 80 mm width.
The surface of the moldings will be covered with HPL.
All the interior doors are produced to TSE (TS 1905) standards.
The press doors are installed as a set (frame + door leaf) and they are tested in the bootstrap machines.
We rigidly and routinely test selected products with drilling methods and record the results. These include: