Standard Door Package Contents

painted door
1 Package

One Door leaf

2 Package

Two Side frames and four architraves

3 Package

One top frame and two architraves.

The Solutions For The Project

Tubular Door Leaf

Tubular Door Leaf

Semi Solid Wood

Semi Solid Wood

Honey comg

Honey Comp

Optional Door Accessories

Door Handle

As Selected 1 Set

Door Lock

As Selected 1 Set

Hinges

Directional Or Non-Directional 3PCS

Door Gasket

5 Meters For Single-Wing Door

ACRYLIC LACQUERED DOORS TECHNICAL SPECIFICATIONS

The aim of this agreement is to indicate the specifications of the materials which are used in doors produced in the bootstrap and to undertake to produce them as follows:

DOOR LEAF


  • Solid materials door stile (internal frame) used for making doors.
  • The optimal humidity rate is %12 consisted of the coniferous tree which was dried privately.
  • After it was purified from the snags, it is combined with finger-jointed, destroyed the deformation, and increased the resistance.
  • The size of the stiles’ section is 28*42
  • There are air space grooves that have 6*3mm measures inside the stiles.
  • Also there will be a double stile on the sub of the door leaf.
  • as there will be an extra stile for opening lock housing.
  • The door leaf is made up of 6mm MDF and PAINTED BY ACRYLIC LACQUER. The lock housing is drilled for a 40mm lock. Hinge housing and lock striker are drilled if there is a special request.
  • There will be used honeycomb which has resin-based, 1,3 kg/cm2 resistance and comply with TSEK in the framework.
  • General principles as mentioned above are the same for producing glazed doors. While the carcass process there will be a solid style on the housing of glass opening that will be drilled in the middle of the door leaf.

DOOR FRAME


  • All the door frames are made from 42mm sandwich panels (12mm MDF+18 mm solid wood + 12mm MDF)
  • All the door frames are suitable for using regulated architraves and the architraves montage grooves, gasket grooves and rabbet will be drilled.
  • The door surface will be PAINTED BY ACRYLIC LACQUER.
  • The join of the door head will be 45 degrees. There will be a drill for the special screw.
  • There will be drilling for gasket groove in the frame rabbet in order that the sound and heat insulation is provided.

FINISHING


  • For surface finishing, we use the best quality of acrylic-based painting that belongs to respective companies.
  • All of the materials are acrylic-based varnish and comply with the environment and human health and includes.
  • The fill and finishing varnishes used in production, have very-high resistance to scratch yellowing.

TESTS


  1. All the interior doors are produced to TSE (TS 1905) standards.
  2. The press doors are installed as a set (frame + door leaf) and they are tested in the bootstrap machines.
  3. We rigidly and routinely test selected products with drilling methods and record the results. These include:
    • Horizontal resistance test
    • Vertical resistance – hanging test
    • Heavy/soft impact test
    • Light/hard impact test